| Blade Diameter (in.)
|
14
|
Color Family
Steel
|
| Material Cut
|
Concrete
|
| Number in Package
|
1
|
| Power Tool Accessory Type
|
Circular Saw Blade
|
| Returnable
|
90-Day
|
| Rim Type
|
Segmented
|
| Saw Blade Material
|
Diamond
|
| Tool Type
|
Saw Blade
|
| Tools Product Type
|
Power Tool
|
Model number: LSS14
Internet number (SKU): 300611530
Price: $89
Brand:
Availability: in stock
Similar products
Description
14 in. 24-Teeth Segmented Diamond Blade for Dry or Wet Cutting Concrete, Stone, Brick and Masonry - Product information
The Whirlwind USA 14 in. Segmented Diamond Blade is designed to provide fast smooth cutting in a variety of materials including brick or block, paves, concrete and stone. The segment height is 10 mm and the arbor size is 1 in. The product features a 20 mm heavy-duty steel bushing that resists heat buildup under intense applications for steady, vibration-free operation and extended life.
- Great for cutting a variety of materials, including brick or block, paves, concrete and stone
- Employ a high grade and concentration of diamond to ensure longer life and better cutting speed
- For use with masonry saws, high-speed power saws and low-horsepower walk-behind saws
- Heavy-duty steel bushing offers lasting durability
- Segmented rim dispels dust and debris for clean cuts
- Suitable for wet and dry cutting conditions
- Not intended for use above 5460 RPM
Product reviews
Rated 5 out of
5
by
THETOOLMAN from
Great blade is this price range!
Wanted to try this right away since I needed to cut 25 feet of 3" concrete for a French drain. Loaded it in my 73cc gas saw and hooked up the hose and right away. I noticed the balance was much better than my old blade, but it has cut a lot of concrete. I was pleased with the fast cut. This was an old concrete with lots of Portland cement and the large aggregate blade didn't heat up. It cut great for a blade in this price range. My last blade was more than twice the price. Time is how I judge tools and I will give this a good workout this spring and summer since I have quite a bit of jobs involving concrete. I think for the price you could not go wrong with this blade.
Date published: 2017-04-23
Rated 5 out of
5
by
deide from
Fast Cutting and very durableI hate cutting concrete! This blade takes some of the hate out of cutting concrete. It cut through 3-1/2 inch concrete very well, and kept is cutting ability after approximately 75 feet of it's first use.
The blade has nice cooling features built in. I used it on dry cutting and I appreciated how well it kept it's initial bite into the concrete. When it holds up well to dry cutting, I know it will do even better in wet cutting and even higher rpm's.
The balance of the blade was perfect. Using a laser to analyze the blade under moderate power, there was no deviation from the laser line. Impressive!
Date published: 2016-12-07
Rated 5 out of
5
by
Anonymous from
I asked and it performedI got this blade to cut pavers and some lanin stone. I used it dry cutting in a stationary saw at about 3500 RPM's. It performed flawlessly. I made repeated cuts on the pavers and found it cut true with no wobble, no distinguishable heat buildup in the blade and a very good feed rate. It cut the Lanin stone very smoothly, even cutting dry. I used a slower feed rate for the stone but was still happy with the performance. In the spring I plan to use it to cut asphalt and concrete on a hand held saw. I'm confident that I will be pleased then too.
Date published: 2016-12-12
Rated 5 out of
5
by
MacEwen from
Great masonry blade.I obtained this blade to cut masonry with. I currently have it mounted dry, on a chop saw. I've used to cut red brick partway through for easy and pedictable splitting to precise sizes. It puts up a good amount of dust, so it's a good idea to wear a good respirator, or tightly fitting filter mask. This blade has performed excellent. I also used it to cut concrete bastings, and soft stone. I recommend it, since it performs very well, at what it claims to do.
Date published: 2017-03-01
Rated 5 out of
5
by
Joco from
Worth more ten it's valueAs a Concrete and Paver contractor I'm alway looking to keep equipment cost down, I thought I would give this Whirlwind USA 14" 24 teeth segmented diamond blade that cuts dry and wet which was very reasonably priced, I figured if I could at least get 4or 500 linear feet of concrete cutting I have gotten my money's worth, eel I way beyond that plus 100's paves, Asphalt, I alway cut wet due to the commercial jobs we do. Yes I would recommend great blade for the valuel
Date published: 2016-11-20
Rated 5 out of
5
by
flyhard from
long lastingThe Whirlwind 14 inch 24-teeth segmented diamond blade is a quality made tool that should last a long time with proper care. I used to to cut stone paves for my side yard. The cuts were made effortlessly from the first cut to the last cut. It is made for both dry and wet cutting situations and has features that allow for cooling of the blade. It also cuts a wide variety of material.
Date published: 2016-12-09
